Adhesives - Trucks & Trailers

truck with numbers.jpg
1
Trailer Load Lockers Metal rails bonded to trailer side walls to improve durability by evenly distributing load.
2
Trailer Roof Dissimilar metals bonded to provide a high strength and corrosion free joint.
3
Cabin Hood Reinforcements Composite grid section bonded to composite shell to provide structural integrity.
4
Sun Visor Acrylic sheet bonded to mounting brackets offering excellent UV resistance whilst improving production speed.
5
Door Extension Composite to metal bond improves process speed.
6
Bumber End Caps Composite bonded to metal aiding durability and process speed.
7
Front Fog Lights Structurally bonded surrounds.

MA1020
Two-part methacrylate adhesive with very low cure shrinkage and very low odor.
MA1025
Two-part methacrylate adhesive with very low cure shrinkage and very low odor designed for structural bonding because it requires virtually no surface prep.
MA300
Two-part methacrylate adhesive designed for structural bonding of composite, thermoplastic, and metal assemblies. MA300 has a working time of 3 to 6 minutes and reaches approximately 500 psi in 12 minutes and 1000 psi in 15 minutes at 74°F (23°C).
MA310
Two-part methacrylate adhesive designed for structural bonding of thermoplastic, metal, and composite assemblies. MA310 is a medium-curing adhesive system. MA310 offers a combination of high strength and stiffness as well as the ability to bond a wide range of materials.
MA320
Two-part methacrylate adhesive designed for structural bonding of thermoplastic, metal, and composite assemblies. MA320 is an excellent choice for composite bonding applications in the transportation, marine, wind energy, and engineering construction industries because of its high strength and durability.
MA330
Two-part methacrylate adhesive designed for structural bonding of thermoplastic, metal, and composite assemblies. MA330 offers a combination of high strength and stiffness as well as the ability to bond a wide range of materials.
MA3940
Two-part methacrylate adhesive designed for structural bonding of thermoplastic, metal, and composite assemblies. MA3940 is the standard for applications requiring an adhesive to bond substrates sensitive to chemical crazing such as acrylic or polycarbonate.
MA420FS
Two-part methacrylate adhesive designed for structural bonding of thermoplastic, metal, and composite assemblies. MA420FS is a standard choice for composites automated bonding applications in the transportation industry, because it requires virtually no surface preparation and its rapid fixture time.
MA422
Two-part methacrylate adhesive designed for structural bonding of composite, thermoplastic, and metal assemblies. MA422 is finding wide usage for composite bonding applications in the transportation and marine industries because it requires virtually no surface preparation.
MA425
Two-part methacrylate adhesive designed for structural bonding of composite, thermoplastic, and metal assemblies. MA425 is finding wide usage for composite bonding applications in the transportation and marine industries because it requires virtually no surface preparation.
MA530
Two-part methacrylate adhesive designed for structural bonding of thermoplastic, metal, and composite assemblies. This product has been designed for use on large structures where a moderate open time product is needed. MA530 may be used for composite and metal bonding for small to large structures.
MA550
Two-part methacrylate adhesive designed for structural bonding of thermoplastic, metal, and composite assemblies. MA550 is the standard for secondary bonding applications in the marine industry because it requires virtually no surface preparation.
MA560-1
Two-part methacrylate adhesive designed for structural bonding of thermoplastic, metal, and composite assemblies. Designed for use on large structures where a very long open time product is needed. Plexus MA560-1 is commonly used for bonding stringers and liners into large fiberglass boats with bond lines up to 1.00 in. (25 mm) thick.
MA590
Two-part methacrylate adhesive designed for structural bonding of thermoplastic, metal, and composite assemblies. MA590 has a working time of 90 to 105 minutes and achieves approximately 500 and 1000 psi in 5 and 6.5 hours, respectively, at 74°F (23°C).
MA685
Two-part methacrylate adhesive designed for solid surface seaming and assembly1. MA685 is highly translucent and clear, UV stable and non-yellowing.
MA8110
Two-part methacrylate adhesive designed for structural bonding of galvanized metal assemblies1. Combined at a 1:1 ratio, MA8110 is a fast-curing system. Plexus MA8110 is designed primarily for bonding galvanized coated metals, in particular Hot Dipped G90 and G60.
MA8120
An advanced direct-to-metal, low halogen two-part methacrylate structural adhesive. It is designed for the structural bonding of various metal, plastic, and composite assemblies.
MA830
Two-part methacrylate adhesive designed for structural bonding of metals without primers. In addition, MA830 does a superb job of bonding thermoplastic and composite assemblies with little or no surface preparation.
MA832
Advanced two-part methacrylate adhesive designed for structural bonding of metals without primers. In addition, MA832 does a superb job of bonding thermoplastic and composite assemblies with little to no surface preparation.
MA920
Two-part methacrylate adhesive designed for structural bonding of thermoplastic, metal and composite assemblies. Breakthrough in methacrylate adhesive technology because it combines high strength, excellent fatigue endurance, and outstanding impact resistance into a low odor product.
PC120
A chemical cleaner conditioner designed to improve the long term durability of Plexus Adhesives when used for adhering aluminum and stainless steel assemblies. Fast drying at ambient temp., parts can be bonded 1 to 3 min. after the cleaner is applied. Recomeded for use with all ITW Plexus adhesives.