Features
- Fast Room temperature cure
- Excellent Environmental Resistance
- Superior Fatigue Resistance
- Primer-less Adhesion
- High strength and high elongation
- Thixotropic
Benefits
- Higher vehicle fuel or EV range due to lower mass
- Reduced cost of assembly
- Improved durability
- Enable lighterweight materials and mixed materials
- Lower capital expenditure cost
Two-part methacrylate adhesive designed for structural bonding of thermoplastic, metal, and composite assemblies. AO420 is a rapid-curing system and is the standard choice for composite bonding applications in the transportation industry.
Two-part methacrylate adhesive designed for structural bonding of thermoplastic, metal, and composite assemblies. MA320 is an excellent choice for composite bonding applications in the transportation, marine, wind energy, and engineering construction industries because of its high strength and durability.
Two-part methacrylate adhesive designed for structural bonding of galvanized metal assemblies. Combined at a 1:1 ratio, MA8110 is a fast-curing system. Plexus MA8110 is designed primarily for bonding galvanized coated metals, in particular Hot Dipped G90 and G60.
An advanced direct-to-metal, low halogen two-part methacrylate structural adhesive. It is designed for the structural bonding of various metal, plastic, and composite assemblies.
Two-part methacrylate adhesive designed for structural bonding of metals without primers. In addition, MA830 does a superb job of bonding thermoplastic and composite assemblies with little or no surface preparation.
Advanced two-part methacrylate adhesive designed for structural bonding of metals without primers. In addition, MA832 does a superb job of bonding thermoplastic and composite assemblies with little to no surface preparation.
Plexus® MA205HV is an advanced non-conductive two-part methacrylate adhesive designed for the structural bonding of various electronic assemblies. In addition, MA205HV does a superb job of bonding metals without primers and engineered thermoplastics and composite assemblies with little-to-no surface preparation. Combined at a 10:1 ratio by volume, MA205HV has a working time of approximately 3 to 5
minutes and achieves a handling strength of 50 psi in approximately 8 minutes on polycarbonate. This product provides a unique combination of high strength, excellent fatigue endurance, outstanding impact resistance, and superior toughness.
Two-part methacrylate adhesive designed for structural bonding of composite, thermoplastic, and metal assemblies. MA300 has a working time of 3 to 6 minutes and reaches approximately 500 psi in 12 minutes and 1000 psi in 15 minutes at 74°F (23°C).
Two-part methacrylate adhesive designed for structural bonding of thermoplastic, metal, and composite assemblies. Plexus MA310 is a medium-curing adhesive system. Plexus MA310 offers a combination of high strength and stiffness as well as the ability to bond a wide range of materials.
Two-part methacrylate adhesive with very low cure shrinkage and very low odor.
Learn more about metal to metal bonding here!