Adhesives - Automotive

Features

  • Fast room temperature cure
  • Superior fatigue resistance
  • Excellent environmental resistance
  • Primer-less adhesion to multiple materials

Benefits

  • Enable light-weight materials
  • Mixed material bonding
  • Tight dimensional tolerances
  • Lower capital costs
  • Lower operating costs

MA3940LH
All purpose fast setting thermoplastics adhesive.
MA420 (AO420)
Two-part methacrylate adhesive designed for structural bonding of thermoplastic, metal, and composite assemblies. AO420 is a rapid-curing system and is the standard choice for composite bonding applications in the transportation industry.
MA1020
Two-part methacrylate adhesive with very low cure shrinkage and very low odor.
MA8110
Two-part methacrylate adhesive designed for structural bonding of galvanized metal assemblies. Combined at a 1:1 ratio, MA8110 is a fast-curing system. Plexus MA8110 is designed primarily for bonding galvanized coated metals, in particular Hot Dipped G90 and G60.
MA8120
An advanced direct-to-metal, low halogen two-part methacrylate structural adhesive. It is designed for the structural bonding of various metal, plastic, and composite assemblies.
MA300
Two-part methacrylate adhesive designed for structural bonding of composite, thermoplastic, and metal assemblies. MA300 has a working time of 3 to 6 minutes and reaches approximately 500 psi in 12 minutes and 1000 psi in 15 minutes at 74°F (23°C).
MA830
Two-part methacrylate adhesive designed for structural bonding of metals without primers. In addition, MA830 does a superb job of bonding thermoplastic and composite assemblies with little or no surface preparation.
MA832
Advanced two-part methacrylate adhesive designed for structural bonding of metals without primers. In addition, MA832 does a superb job of bonding thermoplastic and composite assemblies with little to no surface preparation.
MA205HV
Plexus® MA205HV is an advanced non-conductive two-part methacrylate adhesive designed for the structural bonding of various electronic assemblies. In addition, MA205HV does a superb job of bonding metals without primers and engineered thermoplastics and composite assemblies with little-to-no surface preparation. Combined at a 10:1 ratio by volume, MA205HV has a working time of approximately 3 to 5 minutes and achieves a handling strength of 50 psi in approximately 8 minutes on polycarbonate. This product provides a unique combination of high strength, excellent fatigue endurance, outstanding impact resistance, and superior toughness.
MA320
Two-part methacrylate adhesive designed for structural bonding of thermoplastic, metal, and composite assemblies. MA320 is an excellent choice for composite bonding applications in the transportation, marine, wind energy, and engineering construction industries because of its high strength and durability.