Problem

At a steel plant in Saudi Arabia, a damaged seawater outlet header had a large leak on the side of its DN600 nozzle. It was evident the nozzle damage was too severe to be contained with temporary measures. In addition, the rubber lining within the carbon steel pipe was also damaged.

Given the cooling process was highly corrosive and would continue to negatively affect the carbon steel pipe, especially the flange on top of the return header. a durable corrosion resistant coating was required to provide long-term protection and reduce maintenance repair time.

Solution

Devcon Plastic Steel^® 5 Minute^® Putty (SF) and Devcon Flexane General Purpose Putty was used to repair the metal surface, stop the leak, and provide further corrosion protection to the pipe header.

• The surface was cleaned and steel filled, fast setting Devcon Plastic Steel 5 Minute Putty (SF) was applied to rebuild the missing metal. Next, a carbon steel plate was bonded to provide additional reinforcement to the repaired area.
• The repaired surface was then coated with Devcon Flexane General Purpose Putty to mimic the rubber lining and match the needed height of the rubber.
• A composite wrap was used for structural reinforcement, bringing the damaged sea water outlet header up to its original strength following the ISO 24817 code.